這本書的範例程式碼可在碁峰網站下載 :
# http://books.gotop.com.tw/download/ach019000
其實這本書是譯自 Jack Creasey 寫的 "Raspberry Pi Essentials", 在專案一結尾處有介紹如何安裝 Crontab 的桌面程式 gnome-schedule, 下面是我的實驗記錄.
安裝 gnome-schedule 需要 root 權限, 指令如下 :
1. 開啟 root 權限 :
$ sudo -s
2. 取得更新清單 (可略)
$ apt-get update
3. 升級已安裝軟體 (可略)
$ apt-get upgrade
4. 安裝 gnome-schedule
$ apt-get install gnome-schedule
5. 退出 root 權限
$ exit
當然, 在上面 apt-get 指令前面直接用 sudo 也是可以的.
pi@raspberrypi:~ $ sudo apt-get update
Get:1 http://mirrordirector.raspbian.org jessie InRelease [14.9 kB]
Get:2 http://archive.raspberrypi.org jessie InRelease [22.9 kB]
Get:3 http://mirrordirector.raspbian.org jessie/main armhf Packages [8,981 kB]
Get:4 http://archive.raspberrypi.org jessie/main armhf Packages [144 kB]
Get:5 http://archive.raspberrypi.org jessie/ui armhf Packages [54.8 kB]
Ign http://archive.raspberrypi.org jessie/main Translation-en_US
Get:6 http://mirrordirector.raspbian.org jessie/contrib armhf Packages [37.5 kB]
Ign http://archive.raspberrypi.org jessie/main Translation-en
Get:7 http://mirrordirector.raspbian.org jessie/non-free armhf Packages [70.3 kB]
Ign http://archive.raspberrypi.org jessie/ui Translation-en_US
Get:8 http://mirrordirector.raspbian.org jessie/rpi armhf Packages [1,356 B]
Ign http://archive.raspberrypi.org jessie/ui Translation-en
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en_US
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
Ign http://mirrordirector.raspbian.org jessie/main Translation-en_US
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en_US
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en_US
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Fetched 9,327 kB in 51s (183 kB/s)
Reading package lists... Done
pi@raspberrypi:~ $ sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... The following packages were automatically installed and are no longer required:
libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal
libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal libxfce4ui-1-0 xfce-keyboard-shortcuts
Use 'apt-get autoremove' to remove them.
Done
The following packages have been kept back:
gstreamer1.0-plugins-bad libgl1-mesa-dri libgstreamer-plugins-bad1.0-0 libraspberrypi-bin libraspberrypi-dev libraspberrypi-doc
libraspberrypi0 lxpanel lxpanel-data nuscratch plymouth pypy-upstream raspberrypi-bootloader raspberrypi-sys-mods
raspberrypi-ui-mods sonic-pi xserver-xorg-input-all
The following packages will be upgraded:
libevent-2.0-5 libgd3 libjasper1 liblcms2-2 libpam-modules libpam-modules-bin libpam-runtime libpam0g libssl1.0.0 libxpm4 ntfs-3g
openssl raspi-config rc-gui vim-common vim-tiny
16 upgraded, 0 newly installed, 0 to remove and 17 not upgraded.
Need to get 3,840 kB of archives.
After this operation, 797 kB disk space will be freed.
Do you want to continue? [Y/n] Y
Get:1 http://archive.raspberrypi.org/debian/ jessie/main libpam0g armhf 1.1.8-3.1+deb8u2+rpi1 [121 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main libssl1.0.0 armhf 1.0.1t-1+deb8u6 [853 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main libxpm4 armhf 1:3.5.12-0+deb8u1 [43.7 kB]
Get:4 http://archive.raspberrypi.org/debian/ jessie/main libpam-modules-bin armhf 1.1.8-3.1+deb8u2+rpi1 [101 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgd3 armhf 2.1.0-5+deb8u9 [127 kB]
Get:6 http://mirrordirector.raspbian.org/raspbian/ jessie/main libjasper1 armhf 1.900.1-debian1-2.4+deb8u2 [110 kB]
Get:7 http://mirrordirector.raspbian.org/raspbian/ jessie/main liblcms2-2 armhf 2.6-3+deb8u1 [116 kB]
Get:8 http://mirrordirector.raspbian.org/raspbian/ jessie/main ntfs-3g armhf 1:2014.2.15AR.2-1+deb8u3 [483 kB]
Get:9 http://archive.raspberrypi.org/debian/ jessie/main libpam-modules armhf 1.1.8-3.1+deb8u2+rpi1 [288 kB]
Get:10 http://mirrordirector.raspbian.org/raspbian/ jessie/main openssl armhf 1.0.1t-1+deb8u6 [652 kB]
Get:11 http://archive.raspberrypi.org/debian/ jessie/main libpam-runtime all 1.1.8-3.1+deb8u2+rpi1 [213 kB]
Get:12 http://mirrordirector.raspbian.org/raspbian/ jessie/main libevent-2.0-5 armhf 2.0.21-stable-2+deb8u1 [134 kB]
Get:13 http://archive.raspberrypi.org/debian/ jessie/main raspi-config all 20170214 [18.4 kB]
Get:14 http://archive.raspberrypi.org/debian/ jessie/ui rc-gui armhf 1.7 [38.2 kB]
Get:15 http://mirrordirector.raspbian.org/raspbian/ jessie/main vim-tiny armhf 2:7.4.488-7+deb8u2 [357 kB]
Get:16 http://mirrordirector.raspbian.org/raspbian/ jessie/main vim-common armhf 2:7.4.488-7+deb8u2 [185 kB]
Fetched 3,840 kB in 34s (110 kB/s)
Preconfiguring packages ...
(Reading database ... 130602 files and directories currently installed.)
Preparing to unpack .../libpam0g_1.1.8-3.1+deb8u2+rpi1_armhf.deb ...
Unpacking libpam0g:armhf (1.1.8-3.1+deb8u2+rpi1) over (1.1.8-3.1+deb8u2) ...
Processing triggers for libc-bin (2.19-18+deb8u7) ...
Setting up libpam0g:armhf (1.1.8-3.1+deb8u2+rpi1) ...
Processing triggers for libc-bin (2.19-18+deb8u7) ...
(Reading database ... 130602 files and directories currently installed.)
Preparing to unpack .../libpam-modules-bin_1.1.8-3.1+deb8u2+rpi1_armhf.deb ...
Unpacking libpam-modules-bin (1.1.8-3.1+deb8u2+rpi1) over (1.1.8-3.1+deb8u2) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up libpam-modules-bin (1.1.8-3.1+deb8u2+rpi1) ...
(Reading database ... 130602 files and directories currently installed.)
Preparing to unpack .../libpam-modules_1.1.8-3.1+deb8u2+rpi1_armhf.deb ...
Unpacking libpam-modules:armhf (1.1.8-3.1+deb8u2+rpi1) over (1.1.8-3.1+deb8u2) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up libpam-modules:armhf (1.1.8-3.1+deb8u2+rpi1) ...
(Reading database ... 130602 files and directories currently installed.)
Preparing to unpack .../libssl1.0.0_1.0.1t-1+deb8u6_armhf.deb ...
Unpacking libssl1.0.0:armhf (1.0.1t-1+deb8u6) over (1.0.1t-1+deb8u5) ...
Preparing to unpack .../libevent-2.0-5_2.0.21-stable-2+deb8u1_armhf.deb ...
Unpacking libevent-2.0-5:armhf (2.0.21-stable-2+deb8u1) over (2.0.21-stable-2) ...
Preparing to unpack .../libxpm4_1%3a3.5.12-0+deb8u1_armhf.deb ...
Unpacking libxpm4:armhf (1:3.5.12-0+deb8u1) over (1:3.5.11-1) ...
Preparing to unpack .../libgd3_2.1.0-5+deb8u9_armhf.deb ...
Unpacking libgd3:armhf (2.1.0-5+deb8u9) over (2.1.0-5+deb8u8) ...
Preparing to unpack .../libjasper1_1.900.1-debian1-2.4+deb8u2_armhf.deb ...
Unpacking libjasper1:armhf (1.900.1-debian1-2.4+deb8u2) over (1.900.1-debian1-2.4+deb8u1) ...
Preparing to unpack .../liblcms2-2_2.6-3+deb8u1_armhf.deb ...
Unpacking liblcms2-2:armhf (2.6-3+deb8u1) over (2.6-3) ...
Preparing to unpack .../ntfs-3g_1%3a2014.2.15AR.2-1+deb8u3_armhf.deb ...
Unpacking ntfs-3g (1:2014.2.15AR.2-1+deb8u3) over (1:2014.2.15AR.2-1+deb8u2) ...
Preparing to unpack .../libpam-runtime_1.1.8-3.1+deb8u2+rpi1_all.deb ...
Unpacking libpam-runtime (1.1.8-3.1+deb8u2+rpi1) over (1.1.8-3.1+deb8u2) ...
Processing triggers for initramfs-tools (0.120+deb8u2) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up libpam-runtime (1.1.8-3.1+deb8u2+rpi1) ...
(Reading database ... 130602 files and directories currently installed.)
Preparing to unpack .../vim-tiny_2%3a7.4.488-7+deb8u2_armhf.deb ...
Unpacking vim-tiny (2:7.4.488-7+deb8u2) over (2:7.4.488-7+deb8u1) ...
Preparing to unpack .../vim-common_2%3a7.4.488-7+deb8u2_armhf.deb ...
Unpacking vim-common (2:7.4.488-7+deb8u2) over (2:7.4.488-7+deb8u1) ...
Preparing to unpack .../openssl_1.0.1t-1+deb8u6_armhf.deb ...
Unpacking openssl (1.0.1t-1+deb8u6) over (1.0.1t-1+deb8u5) ...
Preparing to unpack .../raspi-config_20170214_all.deb ...
Unpacking raspi-config (20170214) over (20161207) ...
Preparing to unpack .../archives/rc-gui_1.7_armhf.deb ...
Unpacking rc-gui (1.7) over (1.5) ...
Processing triggers for hicolor-icon-theme (0.13-1) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for gnome-menus (3.13.3-6) ...
Processing triggers for desktop-file-utils (0.22-1) ...
Processing triggers for mime-support (3.58) ...
Processing triggers for systemd (215-17+deb8u6) ...
Setting up libssl1.0.0:armhf (1.0.1t-1+deb8u6) ...
Setting up libevent-2.0-5:armhf (2.0.21-stable-2+deb8u1) ...
Setting up libxpm4:armhf (1:3.5.12-0+deb8u1) ...
Setting up libgd3:armhf (2.1.0-5+deb8u9) ...
Setting up libjasper1:armhf (1.900.1-debian1-2.4+deb8u2) ...
Setting up liblcms2-2:armhf (2.6-3+deb8u1) ...
Setting up ntfs-3g (1:2014.2.15AR.2-1+deb8u3) ...
update-initramfs: deferring update (trigger activated)
Setting up vim-common (2:7.4.488-7+deb8u2) ...
Setting up vim-tiny (2:7.4.488-7+deb8u2) ...
Setting up openssl (1.0.1t-1+deb8u6) ...
Setting up raspi-config (20170214) ...
insserv: warning: script 'vncboot' missing LSB tags and overrides
Setting up rc-gui (1.7) ...
Processing triggers for libc-bin (2.19-18+deb8u7) ...
Processing triggers for initramfs-tools (0.120+deb8u2) ...
You have new mail in /var/mail/pi
pi@raspberrypi:~ $ sudo apt-get install gnome-schedule
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal
libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal libxfce4ui-1-0 xfce-keyboard-shortcuts
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
anacron at gnome-mime-data libart-2.0-2 libbonobo2-0 libbonobo2-common libbonoboui2-0 libbonoboui2-common libgail18 libglade2-0
libgnome-2-0 libgnome2-common libgnomecanvas2-0 libgnomecanvas2-common libgnomeui-0 libgnomeui-common libgnomevfs2-0
libgnomevfs2-common libgnomevfs2-extra libidl0 liborbit-2-0 liborbit2 python-gconf python-glade2 python-gnome2 python-pyorbit
Suggested packages:
libbonobo2-bin libgnomevfs2-bin python-gnome2-doc python-gtk2-doc
The following NEW packages will be installed:
anacron at gnome-mime-data gnome-schedule libart-2.0-2 libbonobo2-0 libbonobo2-common libbonoboui2-0 libbonoboui2-common libgail18
libglade2-0 libgnome-2-0 libgnome2-common libgnomecanvas2-0 libgnomecanvas2-common libgnomeui-0 libgnomeui-common libgnomevfs2-0
libgnomevfs2-common libgnomevfs2-extra libidl0 liborbit-2-0 liborbit2 python-gconf python-glade2 python-gnome2 python-pyorbit
0 upgraded, 27 newly installed, 0 to remove and 17 not upgraded.
Need to get 8,150 kB of archives.
After this operation, 33.8 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libart-2.0-2 armhf 2.3.21-2 [63.8 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main libbonobo2-common all 2.32.1-3 [243 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main liborbit-2-0 armhf 1:2.14.19-0.3 [196 kB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ jessie/main libbonobo2-0 armhf 2.32.1-3 [236 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ jessie/main libglade2-0 armhf 1:2.6.4-2 [76.2 kB]
Get:6 http://mirrordirector.raspbian.org/raspbian/ jessie/main gnome-mime-data all 2.18.0-1 [725 kB]
Get:7 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnomevfs2-common all 1:2.24.4-6 [763 kB]
Get:8 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnomevfs2-0 armhf 1:2.24.4-6 [450 kB]
Get:9 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnome2-common all 2.32.1-5 [936 kB]
Get:10 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnome-2-0 armhf 2.32.1-5 [463 kB]
Get:11 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgail18 armhf 2.24.25-3+deb8u1 [537 kB]
Get:12 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnomecanvas2-common all 2.30.3-2 [132 kB]
Get:13 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnomecanvas2-0 armhf 2.30.3-2 [94.7 kB]
Get:14 http://mirrordirector.raspbian.org/raspbian/ jessie/main libbonoboui2-common all 2.24.5-2 [192 kB]
Get:15 http://mirrordirector.raspbian.org/raspbian/ jessie/main libbonoboui2-0 armhf 2.24.5-2 [177 kB]
Get:16 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnomeui-common all 2.24.5-3 [514 kB]
Get:17 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnomeui-0 armhf 2.24.5-3 [285 kB]
Get:18 http://mirrordirector.raspbian.org/raspbian/ jessie/main libidl0 armhf 0.8.14-0.4 [109 kB]
Get:19 http://mirrordirector.raspbian.org/raspbian/ jessie/main liborbit2 armhf 1:2.14.19-0.3 [110 kB]
Get:20 http://mirrordirector.raspbian.org/raspbian/ jessie/main at armhf 3.1.16-1 [43.9 kB]
Get:21 http://mirrordirector.raspbian.org/raspbian/ jessie/main anacron armhf 2.3-23 [32.2 kB]
Get:22 http://mirrordirector.raspbian.org/raspbian/ jessie/main python-gconf armhf 2.28.1+dfsg-1.1 [51.0 kB]
Get:23 http://mirrordirector.raspbian.org/raspbian/ jessie/main python-pyorbit armhf 2.24.0-7 [57.1 kB]
Get:24 http://mirrordirector.raspbian.org/raspbian/ jessie/main python-gnome2 armhf 2.28.1+dfsg-1.1 [142 kB]
Get:25 http://mirrordirector.raspbian.org/raspbian/ jessie/main python-glade2 armhf 2.24.0-4 [42.1 kB]
Get:26 http://mirrordirector.raspbian.org/raspbian/ jessie/main gnome-schedule all 2.1.1-4 [1,128 kB]
Get:27 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgnomevfs2-extra armhf 1:2.24.4-6 [351 kB]
Fetched 8,150 kB in 33s (244 kB/s)
Selecting previously unselected package libart-2.0-2:armhf.
(Reading database ... 130602 files and directories currently installed.)
Preparing to unpack .../libart-2.0-2_2.3.21-2_armhf.deb ...
Unpacking libart-2.0-2:armhf (2.3.21-2) ...
Selecting previously unselected package libbonobo2-common.
Preparing to unpack .../libbonobo2-common_2.32.1-3_all.deb ...
Unpacking libbonobo2-common (2.32.1-3) ...
Selecting previously unselected package liborbit-2-0:armhf.
Preparing to unpack .../liborbit-2-0_1%3a2.14.19-0.3_armhf.deb ...
Unpacking liborbit-2-0:armhf (1:2.14.19-0.3) ...
Selecting previously unselected package libbonobo2-0:armhf.
Preparing to unpack .../libbonobo2-0_2.32.1-3_armhf.deb ...
Unpacking libbonobo2-0:armhf (2.32.1-3) ...
Selecting previously unselected package libglade2-0:armhf.
Preparing to unpack .../libglade2-0_1%3a2.6.4-2_armhf.deb ...
Unpacking libglade2-0:armhf (1:2.6.4-2) ...
Selecting previously unselected package gnome-mime-data.
Preparing to unpack .../gnome-mime-data_2.18.0-1_all.deb ...
Unpacking gnome-mime-data (2.18.0-1) ...
Selecting previously unselected package libgnomevfs2-common.
Preparing to unpack .../libgnomevfs2-common_1%3a2.24.4-6_all.deb ...
Unpacking libgnomevfs2-common (1:2.24.4-6) ...
Selecting previously unselected package libgnomevfs2-0:armhf.
Preparing to unpack .../libgnomevfs2-0_1%3a2.24.4-6_armhf.deb ...
Unpacking libgnomevfs2-0:armhf (1:2.24.4-6) ...
Selecting previously unselected package libgnome2-common.
Preparing to unpack .../libgnome2-common_2.32.1-5_all.deb ...
Unpacking libgnome2-common (2.32.1-5) ...
Selecting previously unselected package libgnome-2-0:armhf.
Preparing to unpack .../libgnome-2-0_2.32.1-5_armhf.deb ...
Unpacking libgnome-2-0:armhf (2.32.1-5) ...
Selecting previously unselected package libgail18:armhf.
Preparing to unpack .../libgail18_2.24.25-3+deb8u1_armhf.deb ...
Unpacking libgail18:armhf (2.24.25-3+deb8u1) ...
Selecting previously unselected package libgnomecanvas2-common.
Preparing to unpack .../libgnomecanvas2-common_2.30.3-2_all.deb ...
Unpacking libgnomecanvas2-common (2.30.3-2) ...
Selecting previously unselected package libgnomecanvas2-0:armhf.
Preparing to unpack .../libgnomecanvas2-0_2.30.3-2_armhf.deb ...
Unpacking libgnomecanvas2-0:armhf (2.30.3-2) ...
Selecting previously unselected package libbonoboui2-common.
Preparing to unpack .../libbonoboui2-common_2.24.5-2_all.deb ...
Unpacking libbonoboui2-common (2.24.5-2) ...
Selecting previously unselected package libbonoboui2-0:armhf.
Preparing to unpack .../libbonoboui2-0_2.24.5-2_armhf.deb ...
Unpacking libbonoboui2-0:armhf (2.24.5-2) ...
Selecting previously unselected package libgnomeui-common.
Preparing to unpack .../libgnomeui-common_2.24.5-3_all.deb ...
Unpacking libgnomeui-common (2.24.5-3) ...
Selecting previously unselected package libgnomeui-0:armhf.
Preparing to unpack .../libgnomeui-0_2.24.5-3_armhf.deb ...
Unpacking libgnomeui-0:armhf (2.24.5-3) ...
Selecting previously unselected package libidl0:armhf.
Preparing to unpack .../libidl0_0.8.14-0.4_armhf.deb ...
Unpacking libidl0:armhf (0.8.14-0.4) ...
Selecting previously unselected package liborbit2:armhf.
Preparing to unpack .../liborbit2_1%3a2.14.19-0.3_armhf.deb ...
Unpacking liborbit2:armhf (1:2.14.19-0.3) ...
Selecting previously unselected package at.
Preparing to unpack .../archives/at_3.1.16-1_armhf.deb ...
Unpacking at (3.1.16-1) ...
Selecting previously unselected package anacron.
Preparing to unpack .../anacron_2.3-23_armhf.deb ...
Unpacking anacron (2.3-23) ...
Selecting previously unselected package python-gconf.
Preparing to unpack .../python-gconf_2.28.1+dfsg-1.1_armhf.deb ...
Unpacking python-gconf (2.28.1+dfsg-1.1) ...
Selecting previously unselected package python-pyorbit.
Preparing to unpack .../python-pyorbit_2.24.0-7_armhf.deb ...
Unpacking python-pyorbit (2.24.0-7) ...
Selecting previously unselected package python-gnome2.
Preparing to unpack .../python-gnome2_2.28.1+dfsg-1.1_armhf.deb ...
Unpacking python-gnome2 (2.28.1+dfsg-1.1) ...
Selecting previously unselected package python-glade2.
Preparing to unpack .../python-glade2_2.24.0-4_armhf.deb ...
Unpacking python-glade2 (2.24.0-4) ...
Selecting previously unselected package gnome-schedule.
Preparing to unpack .../gnome-schedule_2.1.1-4_all.deb ...
Unpacking gnome-schedule (2.1.1-4) ...
Selecting previously unselected package libgnomevfs2-extra:armhf.
Preparing to unpack .../libgnomevfs2-extra_1%3a2.24.4-6_armhf.deb ...
Unpacking libgnomevfs2-extra:armhf (1:2.24.4-6) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for gconf2 (3.2.6-3) ...
Processing triggers for systemd (215-17+deb8u6) ...
Processing triggers for gnome-menus (3.13.3-6) ...
Processing triggers for desktop-file-utils (0.22-1) ...
Processing triggers for mime-support (3.58) ...
Setting up libart-2.0-2:armhf (2.3.21-2) ...
Setting up libbonobo2-common (2.32.1-3) ...
Setting up liborbit-2-0:armhf (1:2.14.19-0.3) ...
Setting up libbonobo2-0:armhf (2.32.1-3) ...
Setting up libglade2-0:armhf (1:2.6.4-2) ...
Setting up gnome-mime-data (2.18.0-1) ...
Setting up libgnomevfs2-common (1:2.24.4-6) ...
Setting up libgnomevfs2-0:armhf (1:2.24.4-6) ...
Setting up libgnome2-common (2.32.1-5) ...
Setting up libgnome-2-0:armhf (2.32.1-5) ...
Setting up libgail18:armhf (2.24.25-3+deb8u1) ...
Setting up libgnomecanvas2-common (2.30.3-2) ...
Setting up libgnomecanvas2-0:armhf (2.30.3-2) ...
Setting up libbonoboui2-common (2.24.5-2) ...
Setting up libbonoboui2-0:armhf (2.24.5-2) ...
Setting up libgnomeui-common (2.24.5-3) ...
Setting up libgnomeui-0:armhf (2.24.5-3) ...
Setting up libidl0:armhf (0.8.14-0.4) ...
Setting up liborbit2:armhf (1:2.14.19-0.3) ...
Setting up at (3.1.16-1) ...
insserv: warning: script 'vncboot' missing LSB tags and overrides
Setting up anacron (2.3-23) ...
insserv: warning: script 'vncboot' missing LSB tags and overrides
Setting up python-gconf (2.28.1+dfsg-1.1) ...
Setting up python-pyorbit (2.24.0-7) ...
Setting up python-gnome2 (2.28.1+dfsg-1.1) ...
Setting up python-glade2 (2.24.0-4) ...
Setting up gnome-schedule (2.1.1-4) ...
Setting up libgnomevfs2-extra:armhf (1:2.24.4-6) ...
Processing triggers for libc-bin (2.19-18+deb8u7) ...
Processing triggers for systemd (215-17+deb8u6) ...
Processing triggers for python-support (1.0.15) ...
這樣就安裝好 gnome-schedule 了.
接下來輸入 startx 進入桌面系統, 在 Menu 的 System tools 裡可以看到 Gnome-schedule, 執行後進入設定畫面 :
如果 Menu 中找不到 Scheduled Task, 可以在 "Menu/Run" 彈出視窗中輸入 gnome-schedule 後按 OK 也可以進入設定頁面 :
參考 :
# SCHEDULING TASKS WITH CRON
沒有留言:
張貼留言